turbo® II Bullnose performs it’s job in the toughest environments day in and day out. The unique design is all about preventing micro-abrasive dust from entering the machine’s engine creating cleaner air to prolong the engine life. turbo® II Bullnose is the industry standard precleaner by which all precleaners are judged.
From its durable metal construction to its high efficiency and low restriction across the entire range, turbo® II Bullnose is chosen worldwide by equipment operators for installation on loaders, graders, crushers, haulers, mixers, and mining machines. Anywhere a high level of protection is needed and where dust is an issue, the turbo® II Bullnose is a must.
The turbo® II Bullnose is the only metal precleaner that offers a “Top Down” air flow by drawing dirty air through the protective screen at the top of the unit. turbo® II Bullnose Precleaners have aerodynamically designed overlapped vanes that force the incoming air to spin and causing separation of dust and dirt from the air by centrifugal force. The dust and debris then spins down the wall of the main chamber and into the blower chamber where the high velocity spinner forces the dirt to the discharge ports at the base of the unit. As the velocity of the primary air stream increases, it ejects out additional dirt and debris providing the cleanest possible air to the filter element. This design offers exceptional balance between added restriction and efficiency.
Designed specifically for equipment used in landfill, agricultural, and other similar harsh environments, the turbo HD packs all of the same features as turbo II, plus an added layer of extra protection.
Competitors typically use “REVERSE AXIAL” designs. This means that the air is drawn in through the base of the unit and then must make a “U” turn which adds restriction and reduces the power of the engine. Additional restriction to the engine will cause the need for more frequent engine filter replacements.
turbo® Precleaners are tested to industry SAE J726 and ISO 5011 standards.
turbo® II Bullnose is currently manufactured in four sizes and covers a CFM range from 100 to 1100 CFM. Additionally turbo® II Bullnose offers a similar model made out of high strength glass-reinforced polymer that is lighter in weight and easier to install, the turbo® III.
| turbo® II Precleaners Bullnose |
CFM Range |
|
| FOR UNDER COVER AND HORIZONTAL MOUNT | ||
| Model 24 turbo® II Precleaner Bullnose |
21-1024010 |
100-250 |
| Model 35 turbo® II Precleaner Bullnose |
21-1035020 |
250-350 |
| Model 46 – 4 1/2″ turbo® II Precleaner Bullnose |
21-1046011 |
350-700 |
| Model 46 – 5″ turbo® II Precleaner Bullnose |
21-1046009 |
350-700 |
| Model 46 – 6″ turbo® II Precleaner Bullnose |
21-1046010 |
350-700 |
| Model 68 – 6″ turbo® II Precleaner Bullnose |
21–1068015 |
700-1100 |
| Model 68 – 7″ turbo® II Precleaner Bullnose |
21-1068016 |
700-1100 |
| Model 68 – 8″ turbo® II Precleaner Bullnose |
21-1068017 |
700-1100 |